How to Disable IPv6 in Windows Server 2012

   

\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\TCPIP6\Parameters

Right click on Parameters, expand New, and select DWORD (32-bit) Value

Enter DisabledComponents into the Name field

Double click on the new DisabledComponents value, enter ffffffff into the Value data dialog box, and click theOK button

   

[기술문서]

How to disable IPv6 or its components in Windows

https://support.microsoft.com/en-us/kb/929852

   

   

How to Disable IPv6 in Windows Server 2012

The world is running out of Internet addresses. IPv6 is the answer to that problem, but in some cases and implementations it can cause problems of its own. There's no reason to disable IPv6 if it's not causing a problem. If it is, it can be disabled with an easy registry hack.

   

Editing the properties of a network adapter and unchecking the IPv6 box only unbinds the protocol from the adapter and does not disable it. This can have unintended consequences and cause other problems.

   

   

To disable IPv6 entirely on your system you'll need to edit the registry.

   

To display your IPv6 address and confirm that IPv6 is enabled, open a command prompt and run ipconfig.

   

   

In the example above we see that there is an IPv6 address and the 6to4 virtual adapter. We'll need to add a registry key to disable IPv6.

   

There are two ways to do this. The first method uses the registry editor (regedit) to add the key and the second uses the command prompt. The command prompt method is a little more prone to error, but if you're comfortable using the command prompt, jump past the regedit method for a more direct and faster method.

   

Method 1: Regedit

   

Press the Windows Key and the R key at the same time to bring up the Run dialog box.

   

   

Type regedit in the Run dialog box and click OK

   

   

   

Use Registry Editor to expand the registry tree and browse to:

\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\TCPIP6\Parameters

   

Right click on Parameters, expand New, and select DWORD (32-bit) Value

   

   

Enter DisabledComponents into the Name field

   

   

Double click on the new DisabledComponents value, enter ffffffff into the Value data dialog box, and click theOK button

   

   

Confirm the new registry value contains the required data.

   

   

After restarting the computer, run ipconfig again at the command prompt to confirm that IPv6 is disabled.

   

   

ipconfig shows nothing but good old reliable IPv4.

   

Method 2: Command Prompt

   

Alternately, the required registry key (DisabledComponents) and data can be added to the registry with the Reg Add command.

   

Start a command prompt with administrative permissions and enter the following command:

   

reg add hklm\system\currentcontrolset\services\tcpip6\parameters /v DisabledComponents /t REG_DWORD /d 0xFFFFFFFF

   

   

If you entered the command correctly, after rebooting, ipconfig should show no IPv6 addresses or 6to4 adapters.

   

Regardless of what method you've used, if something goes wrong, use the registry editor to verify the new registry key is in the correct spot in the registry, the name is spelled exactly as it should be, and the data is the proper value.

   

출처: <http://www.techunboxed.com/2014/01/how-to-disable-ipv6-in-windows-server.html>